3D-Fuel Standard PLA+ Filament

Standard PLA from 3D-Fuel® is made from NatureWorks™ 4043d Ingeo PLA

Standard PLA is a basic, entry-level PLA filament. It's available in a broad color selection and uses only virgin NatureWorks Ingeo 4043d PLA resin. No fillers or stretchers means a more predictable 3D printing experience. Because there are no fillers, the ideal print temp might be 5-10C higher than your current PLA settings.

Filament Specifications

Filament Diameter: 2.85 mm (0.1122 inches)

Amount of Filament: 1 kg (2.2 lb), or 4 kg (8.8 lb)

Hot End Temperature Range: 190-220C

Print Surface: PEI, heated bare glass, blue painters tape, BuildTak, WhamBam

Print Surface Temperature: 0°C-60°C

Recommended Print Speed: 40 – 100 mm/s

HDT (Unannealed) 55°C  

Quality:

All 3D-Fuel 3D printer filament is manufactured to demanding performance specifications.

The tolerances of each individual spool of filament are printed on the box.

Packaging Information

A full 1kg (2.2lbs) of Standard PLA plastic filament arrives on a durable plastic reel and is vacuum sealed with a desiccant packet to keep out any moisture.

Color Representation Disclaimer

Actual filament colors may vary from the computer monitors representation.  Monitors display colors differently. We try to ensure our photos are as life-like as possible, but the actual color may vary slightly from your monitor. We cannot guarantee that the color you see accurately portrays the true color of the product.